Bug Fixes:

• Fixed an issue where the JATE Audit Failed - LAN Port4’s voltage over the specification (2.1Vp-p)..

Procedures for uploading the new firmware:

To load this firmware, click Router Upgrade from the Maintenance section. Then:

1. Download and unzip the new file from NETGEAR. The filename after unzipping is wnce4004-V1.0.0.34.img

   Download Link: http://www.downloads.netgear.com/files/GDC/WNCE4004/WNCE4004-V1.0.0.34.zip

2. Using a web browser, login to the router as admin.
3. Under Maintenance click Router Upgrade.
4. Click Browse and locate the upgrade file wnce4004-V1.0.0.34.img.
5. Click Upload.
6. Wait for the upgrade progress bar to complete and final prompt to appear.

If problems occur after upgrading, try clearing the configuration by pressing the Factory Defaults push button on the rear panel until the Test LED blinks (about 5 seconds). Then re-enter your configuration information manually.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.